|
INVERTERISED MIG / MAG (CO2) WELDING
MACHINES
The reliable power saving
Inverterised Welding Rectifiers. A quality product from the house of
high technology. Specially designed to meet your welding
requirements. The machines are built to work under the extreme
industrial/ field conditions. All products are designed,
manufactured & tested under one roof to ensure the
quality.
Microcontroller
Interfaced Models also available
Features
- IGBT - Inverterised Power
Source with closed loop feedback control enables remote control of
welding current and voltage. Arc conditioned feedback system
ensures Constant arc length, eliminating need for Highly skilled
welder.
- Instant Arc Starting and
stopping controls.
- Servo-controlled wire feeder
ensures constant & uniform feeding of wire.
- All position welding, high
deposition rate with Metals such as mild steel, stainless steel,
Carbon Steel, Aluminium and their alloys with proper gases and
accessories.
- Preflow of shielding gas
interlock, 2T/4T functions with crator current control
- Protection of power source
against under voltage, over voltage, single phasing, thermal
overheating, Short circuiting of output terminals etc. with
annunciation.
- OPTIONAL FEATURES SUCH AS
pulsing, pulse duration selection, pulse frequency selection etc.
applied to SYNERGIC MIG operation can be incorporated on
request.
- OPTION FOR CONSTANT CURRENT /
CONSTANT VOLTAGE POWER ON REQUEST.
- Microcontroller based
models.
ADVANTAGE & BENEFITS
:
- Most reliable, least
maintenance.
- Maximum power saving (Upto
40%).
|
MODELS(POWER
SOURCES)
|
ICP-300 |
ICP-400 |
ICP-600 |
ICP-800 |
| INPUT SUPPLY
VOLTAGE |
3ph,415V.±15%,50hz
|
| MAX. WELDING CURRENT
(A) |
300
|
400 |
600 |
800 |
| OPEN CIRCUIT VOLTAGE
(V) |
36 |
54 |
68 |
70 |
| VOLTAGE CONTROL
RANGE |
STEPLESS UPTO OCV |
MAX. WELDING CURRENT (A)
60%
DUTY CYCLE
100% DUTY CYCLE |
300
231 |
400
308 |
600
462 |
800
616 |
| INSULATION CLASS |
H |
H |
H |
H |
| COOLING |
FORCED AIR |
FORCED AIR |
FORCED AIR |
FORCED AIR |
| PROTECTION ENCLOSURE |
IP 23 |
IP 23 |
IP 23 |
IP 23 |
| DIMENTIONS (W X D X H) mm |
300X630X585 |
400X700X450 |
500X750X450 |
500X800X500 |
| WEIGHT (KGS.) |
45 |
55 |
80 |
100 |
| WIRE FEEDER |
2/4 ROLLS QUICK RELEASE
TYPE |
2/4 ROLLS QUICK RELEASE
TYPE |
| WIRE DIA (mm) SS, MS & AL |
0.8 TO 1.2 mm |
0.8 TO 2.4 mm |
| WIRE DRIVE MOTOR |
PERMANENT MAGNET DC |
PAN CAKE TYPE |
PAN CAKE TYPE |
| CONTROL |
SERVO CONTROL |
SERVO CONTROL |
| CONTROL TO THE WIRE FEEDER |
THROUGH THE POWER
SOURCE |
THROUGH THE POWER
SOURCE |
| WIRE FEED RATE METERS / MINUTE |
1 TO 19.0 (UPTO 26 ON
REQUEST) |
1 TO 19.0 (UPTO 26 ON
REQUEST) |
| TORCHES |
TDG-300 |
TDG-400 |
TDG-600 |
TDG-800 |
| RATED CURRENT CAPACITY AT 60% DUTY
CYCLE, FOR CO2 |
300 |
400 |
600 |
800 |
| FOR MIG |
231 |
300 |
500 |
600 |
| COOLING |
GAS |
GAS |
WATER |
WATER |
| TORCH CABLE LENGTH |
3 MTRS |
3 MTRS |
5 MTRS |
5 MTRS |
OPTIONAL ACCESSORIES :
1) Pressure
regulator with flow meter.
2) CO2 gas preheater.
3) In built
wire feeder.
4) Relevant torch fitted with accessories.
5)
Gas hose 5 meters length.
6) Earth / Ground cable 5 meters
length with clamp.
NOTE : These power sources are rated for
sub-merged Arc welding applications |
