MMA/TIG Welding Machine -- MINIWELD-160

MMA/TIG Welding Machine -- MINIWELD-160

MINIWELD 160 is IGBT Inverter Based Welding Machine.

Special Features:

  • Single Phase Power Source – Designed to perform in any situation.
  • Reliable – Designed to perform under extreme Indian industrial and climatic conditions.
  • Guaranteed Performance – Highly energy efficient that outperforms other similar rectifiers. Excellent welding quality with all types of electrodes including aluminium. Rectifiers for aluminium and cellulosic electrodes are supplied on request.
  • After Sales Service – Prompt response and speedy service. Least expensive, readily available spares.

Technical Specifications of MINIWELD-160:

  • Input Supply : 1 Phase; 230 Volts +/- 15%; 50/60 Hz
  • Open Circuit Voltage : 70 – 90 volts
  • Output Current @ 35% Duty Cycle(Ampere) : 160
  • Output Current @ 60% Duty Cycle(Ampere) : 122
  • Output Current @ 100% Duty Cycle(Ampere) : 95
  • Class of Insulation : 'F/H'
  • Enclosure Protection : IP 23
  • Current Range : 3-160 Amperes
  • Type of Cooling : Forced Air
  • Weight : 8 Kgs
  • Dimension (L X W X H) : 145 X 325 X 255 mm

Models:

MINIWELD-160

Inverter based single phase welding rectifier with maximum welding current of 160 Amperes.

MINIWELD-230

Inverter based single phase welding rectifier with maximum welding current of 210 Amperes

ss="modals">

Standard Scope of Supply:

  • Power Source.
  • Earthing Cable of 3 meters & Clamp.
  • Input cable of 5 meters length.
  • Welding cable of 3 meters length with lugs.
  • Welding electrode holder.

Optional Accessories –

  • Input cable.
  • TIG Accessories (HF Unit, water cooling unit, Gas cooled TIG Welding torch, water cooled TIG Welding torch).
  • Safety Wear – Shoes, Goggles.
  • Remote control unit.

Photos & Videos