CNC Plasma Cutting Machines

CNC Plasma Cutting Machines

KALI-HD Series

KALI-i HD Series

What is Plasma?

Technocrats offer wide range of state of the art most user friendly CNC Profile Cutting Machines which are considered one of best option in market today. We have made a space for ourselves in a very short span of time as the leading manufacturers of Plasma CNC Profile Cutting Machines and exporter based in Mumbai in India. The features of our machines are developed based on the feedback received from survey & our users. This has made our system most acceptable to users. Learning; the operation is childs job. Hardened & Ground Drive mechanism, Precision rack & pinion, precisely fabricated and machined surfaces produces excellent stability to the system. The rapid speed is achievable in the range of 15 meters per minute. The cutting of sheets of thickness in the range of 0.2 mm or so is possible at speed of 14 meters per minute by our most popular cnc machine model known as CUB. The controller, softwares, drives and motors are from internationally reputed manufacturers and are time tested for their reliable performance. Plasma Cutting power sources up to the capacity for 100 mm and oxyfuel/gas cutting upto 200 mm is readily available from 1500mm width to 6000mm width and length up to 100 meters. Auto plate alignment, Auto Nesting is standard feature of our machines. Under water cutting, fume extraction system and pollution controlled enclosures are provided as per the requirement of customers. System can be designed for multi functions such as drilling, taping, marking, beveling etc as per the requirement. Computerized Numerically Controlled Plasma/Gas profile cutting system provides most economical solution for metal cutting for fabrication industry. All drawings produced in AutoCAD is imported into the nesting software and the desired codes (G & M) are transferred to the CNC controller which in turn controls drives to cut shapes in an optimum order. Basic system of X-Y table, motors with drives, Auto height control systems, Plasma cutting torch, Gas cutting torches, Plasma power supply, Gas supply manifold etc. Air, oxygen, Argon, Argon+Hydrogen, Nitrogen etc. are used as plasma gas in combination with shielding gas depending upon the materials being cut. Air and oxygen are used for mild steel cutting with plasma for economic reasons. All ferrous and non-ferrous materials can be cut with Plasma. However Plasma cutting of mild steel is limited to 50mm thickness for economic reasons. Gas cutting (oxy-fuel) is possible up to 300mm thicknesses.

Plasma Cutting Chart As Per Machine Models

Models Type Input Output Torch Type Cutting Thickness
Pierce (mm) Edge (mm)
KALI 150HD   Thyristor 3-phase 30-200 AMPS Water Cooled 35 75
KALI 200HD   Thyristor 3-phase   30-300 AMPS Air Cooled 40 80
KALI 400HD   Thyristor 3-phase   60A/135V Air Cooled 45 100
KALI 500HD   Thyristor 3-phase   90A/140V Air Cooled 50 125
KALI 45i HD   Inverter 3-phase   120A/140V Air / Water Cooled   6 12
KALI 80i HD   Inverter 3-phase   200A/140V Water Cooled 12 25
KALI 100i HD   Inverter 3-phase   300A/140V Water Cooled 15 30
KALI 200i HD   Inverter 3-phase   500A/140V Water Cooled 25 40
KALI 300i HD   Inverter 3-phase   90A/135V Air Cooled 32 50