Manual Plasma Cutting Machine -- KALI-45i

Manual Plasma Cutting Machine -- KALI-45i

IGBT Based Plasma Cutting Machine:

KALI-45i is plasma cutting machine with maximum 10-45 amperes output current range. It can produce 0.3mm to 8mm fine cut and 16mm severance cut on any electro conductive metal plate like Stainless Steel(SS), Mild Steel(MS), Copper, Brass, Aluminium, Inconel, Monel, Titanium, Nickel, Chrome, Bronze, Galvanized Steel, Heated Steel, Wear Plates & Castings etc.
It saves over 50% electricity consumption cost compared to conventional machines.

Special Features:

  • 100% Indian Product.
  • Efficiency and Power Factor over 90%.
  • Saving over 50% compared to conventional mahines.
  • Air Cooled Torch with 6meters long cable.
  • Unique torch design which allows operator to place the torch on the job being cut.
  • Best cut quality / input power ratio .
  • Post cutting operations such as grinding of dross etc. almost eliminated.
  • Designs takes care of EMI interference which is prominent with other machines.
  • Highest consumable life.
  • Almost all parts of the torch are replaceable hence least maintenance cost .
  • Safety interlocks for operators and machine against high/low voltage, low air pressure.
  • Power source is designed for continuous operations.
  • Least operating cost & Energy Effiicient.
  • Heavy duty design for integration with CNC profile Cutting machines.

Technical Specification Of KALI-45i:

  • Input : 3 Phase, 415Volts± 15%, 50 Hertz
  • Open Circuit Voltage : 350 Volts
  • Output Current Range : 10-45 AMPS
  • Max Power Output : 4 KW
  • Power Factor : 0.9+
  • Cutting Range (Fine/Severence) : 8/16 mm
  • Insulation Class : “H/F”
  • Power Source Cooling : Forced Air
  • Torch Cooling : Air
  • Suitability with plasma gases : Oil Free Compressed Air

Standard Scope of Supply:

  • Air cooled Air Plasma Cutting manual torch with 6 mtrs of cable hose and operating switch. –1 no
  • Earthing cable with clamp. –1 no.
  • Electrode - 5 Sets.
  • Nozzles - 5 Sets.
  • Hose pipe of 5 meters with end coupling.

Consumables:

Spares & Consumables available for the machine KALI-45i:

  • Nozzle.
  • Electrode.

Spares:

  • Hand Torch Assembly.
  • Front Cap.
  • Contact Tube.
  • Electrode Holder.
  • Nozzle Holder.

Optional Accessories:

  • Air/Water Cooled Plasma Cutting torch assembly of 6meters suitable for mechanised operation.
  • Motorised Trolly Model "CUT MASTER" suitable for straight cutting with 1.8meters long rack and circle cuting attachment.

Photos & Videos