plasma cutting systems, plasma cutting systems manufacturer, plasma cutting systems suppliers, air plasma cutting manufactuere,India

GAS PLASMA CUTTING MACHINE

IMAGE TO COME

TECHNICAL SPECIFICATIONS FOR GAS PLASMA CUTTING ARE HIGHLIGHTED BELOW :

TYPES	MODELS					GAS PLASMA CUTTING
TYPES	KALI-80	KALI-100	KALI-150	KALI-200	KALI-400	KALI-500	KALI-700	KALI-1000
INPUT	3PH, 415V±15% 50 Hz	3PH, 415V±15% 50 Hz	3PH, 415V±15% 50 Hz	3PH, 415V±15% 50 Hz	3PH, 415V±15% 50 Hz	3PH, 415V±15% 50 Hz	3PH, 415V±15% 50 Hz	3PH, 415V±15% 50 Hz
OPEN CIRCUIT VOLTAGE, VOLTS	330	330	330	330	330	330	330	330
OUTPUTCURRENT RANGE, A	30-90	30-120	30-200	30-200	60-400	60-500	100-700	100-100
MAXIMUM POWER OUTPUT, KW	12	16.8	30	48	64	85	112	180
POWER FACTOR	0.75-0.80	0.75-0.80	0.75-0.80	0.75-0.80	0.75-0.80	0.75-0.80	0.75-0.80	0.75-0.80
CUTTING RANGE, MM(FINE/COARSE)	25/40	32/50	50/75	75/100	100/125	125/150	150/200	200/250
INSULATION CLASS	H/F	H/F	H/F	H/F	H/F	H/F	H/F	H/F
POWER SOURCE COOLING	FORCED AIR	FORCED AIR	FORCED AIR	FORCED AIR	FORCED AIR	FORCED AIR	FORCED AIR	FORCED AIR
RECO. TORCH COOLING	AIR	AIR/WATER	WATER	WATER	WATER	WATER	WATER	WATER
SUITABILITY WITH PLASMA GASES	AIR		AIR, ARGON, NITROGEN, ARGON + H2			ARGON, NITROGEN, ARGON + H2

All water cooled torches with their power sources can be tailored for under water cutting.

All torches can be used for gouging application with the help of attachments supplied on request.

All power sources are designed for operation with profile cutting systems including cnc systems.

Cost of cutting mild steel upto 30 mm thick is most economical with air plasma cutting process.

Air plasma cutting is most economical.

All metals such as ss, ms, copper, brass, al, castings, inconel, monel etc. can be cut by plasma cutting process.

« BACK

TOP