MMA/TIG Welding Machine -- SAPPHIRE-600
Diode based power sources are the basic type arc welding power source used for MMA/TIG applications. Current control is achieved through saturable core reactor. Very reliable power source but not recommended for radiographic welding application as there is no dependable feedback for maintaining the output current constant due to fluctuation of input supply or change in load. Power factor is poor for these power sources.
Special Features:
- Unique design.
- Heavy duty, designed for project site applications.
- Minimum current starts from 10 amperes compared to others’ 30 amperes. This allows thin sheet TIG welding..
- Light weight & compact remote control pendant.
- Almost No maintenance machine.
Advantages:
- Heavy duty rugged machine.
- Simple to use.
- Very easy to maintain.
Technical Specifications of SAPPHIRE-500:
- Input Supply : 3 Phase; 400 Volts+/- 10%; 50/60 Hz
- Current Control Range : 40 Ampere to 600 Ampere
- Low : 40 Ampere to 200 Ampere
- Medium : 50 Ampere to 400 Ampere
- High : 300 Ampere to 600 Ampere
- Open Circuit Voltage : 75-85 VDC
- Input KVA at 60% duty cycle 400 Amps : 52.8
- Input KVA at 100% duty cycle 300 Amps : 28.8
- Insulation : Class ‘H’
- Cooling : Fan Cooled
- Dimension (L X W X H) : 690 X 630 X 730 mm
- Weight : 310 Kgs
Standard Scope of Supply:
- Uniquely designed Arc welding rectifier Model Sapphire - 600 with silicon controlled, step less current control in a given range ( low, medium, high) using a small pot, high speed cooling fan, powder coated body mounted on four wheel having current control range 30 to 500 Amperes
Optional Accessories:
- Input cable.
- TIG Accessories (HF Unit, water cooling unit, Gas cooled TIG Welding torch, water cooled TIG Welding torch).
- Safety Wear – Shoes, Goggles.
- Remote control unit.
