Heavy Duty Air Plasma Cutting System
KALI-100F is plasma cutting machine with maximum 120 amperes output current. It can cut upto 32mm fine cut and 50mm severance cut of any electro conductive metal plate like Stainless Steel, Mild Steel, Copper, Brass, Aluminium, Inconel, Monel, Titanium, Nickel, Chrome, Bronze, Galvanized Steel, Heated Steel, Wear Plates & Castings etc.
It is heavy duty, rugged machine suitable fot both workshop & project sites
Special Features
- 100% Indian Product.
- Safety interlocks to protect the operator & the machine.
- Designed for continuous operation.
- Compatible for CNC profile cutting machine.
- Best Quality / Input Power Ratio.
- Minimum post cutting operations.
- Unique torch design for ease in operation.
- Least maintenance cost.
- Highest consumable life.
- Fixed or step controlled power source.
- Output current for the machine is fixed and does not change.
- Cutting speed requires adjustment depending upon the thickness.
- Suitable for application where cutting thickness do not vary much.
- Most reliable , No electronics, Least maintenance cost.
Technical Specification Of KALI-100F
- Input : 3 Phase, 415Volts± 15%, 50 Hertz
- Open Circuit Voltage : 330 Volts
- Output Current Range : 120 (2×60) AMPS
- Max Power Output : 12.2 KW
- Power Factor : 0.5
- Cutting Range (Fine/Severence) : 32/50 mm
- Insulation Class : “H”
- Power Source Cooling : Forced Air
- Torch Cooling : Air/Water
- Suitability with plasma gases : Oil Free Compressed Air, Argon, Nitrogen, Argon+H2
Standard Scope of Supply
- Air cooled Air Plasma Cutting manual torch with 6 mtrs of cable hose and operating switch. –1 no
- Earthing cable with clamp. –1 no.
- Hose pipe of 5 meters with end coupling.
- Electrode & Nozzles – 5 Sets.
- Front cap – 1 number.
Consumables
- Nozzle
- Electrode
Spares
- Hand Torch Assembly.
- Front Cap.
- Contact Tube.
- Electrode Holder.
- Nozzle Holder.
Optional Accessories
- Air / Water Cooled Plasma Cutting torch assembly of 6meters suitable for mechanised operation.
- Motorised Trolly Model “CUT MASTER” suitable for straight cutting with 1.8meters long rack and circle cutting attachment.
- Heavy Duty water cooling & circulating unit with water tank, radiator and cooling fan.
- Circle Cutting attachment
- Air Compressor.
- Gouging Torch.
- Extra Cable Length.